Strobe, Monitor – Samsung SV-5000W User Manual
Page 18
35
GB
34
STROBE
You can see still images in succession.
1
Press the STROBE button during playback.
Result:
“STROBE” is displayed on the screen.
A Discrete image is displayed on screen similar to
SLOW mode.
2
Press the +/- button to vary the speed of the STROBE mode.
3
To exit the STROBE mode, press the STROBE button.
When in the ART mode, the picture contrast is changed to
resemble artwork.
1
Press the ART button during PLAY or STROBE mode.
Result:
The contrast of the image is changed.
2
Press the +/- button to vary the contrast of the ART mode.
3
To exit the ART mode, press the ART button.
ART
ART INPUT
2
3
5
6
8
9
CLR/RST
CH
STROBE AUDIO
ART INPUT
5
6
8
9
0
CLR/RST
CH
REW
PLAY
F.F
1
2
ART INPUT
2
3
5
6
8
9
CLR/RST
CH
STROBE AUDIO
ART INPUT
5
6
8
9
0
CLR/RST
CH
REW
PLAY
F.F
1
2
DISPLAY MONITOR A.DUB
REC
P/STILL
INPUT
SYSTEM
OUTPUT
SYSTEM
STOP
1
MONITOR
You can see the original input signal during a conversion recording.
1
Press the MONITOR button during conversion.
Result:
◆
Original input signal is displayed on screen.
2
Press the MONITOR button again.
Result:
◆
The converted output signal is displayed on screen.
You can:
◆ stop the cassette at a given frame (image) ; and
◆ advance one frame at a time.
➢
No sound is heard when playing back frame by frame.
1
Press the PLAY (
) button to start playing the cassette.
2
Press the P/Still button ( ) to stop the tape at a given frame.
3
Press the P/Still button ( ) again to advance forward frame by frame.
4
Instead of Step
3
you can also turn the JOG to the left or right to
advance frame by frame backward or forward.
5
To return to normal playback, press the PLAY (
) button.
☛
If the Frame-by-Frame function is used for more than five
minutes (except for JOG function), the VCR will auto-
matically play to protect the cassette and video heads.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyse an athlete’s technique, movement
by movement.
The Shuttle function is available on the remote control.
➢
No sound is heard when playing a sequence at variable
speeds.
1
Press the PLAY (
) button to start playing the cassette.
2
Turn the SHUTTLE RING to the left or right to vary the playback
speed.
3
Each time you turn the shuttle ring, the speed will change as
shown in the following illustration.
☛
When you activate Variable Speed play, there will be no
color in some modes. This is normal operation. Modes
with no color are shown below.
◆
No color modes : • Variable Speed play of LP recordings
on any system.
• X2 and Still/Slow play of SLP recordings in PAL-M mode.
☛
If the picture is noisy or distored during X2 play or other
variable speed play mode, adjust the tracking
manually for a cleaner picture.
Playing a Sequence at Variable Speeds
Playing a Sequence Frame by Frame
AUTO MENU
R
EV
FW
D
T
R
AC
KI
NG
SLO
W
0
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
1
2, 3
AUTO MENU
R
EV
FW
D
T
R
AC
KI
NG
SLO
W
4
2
(LP on PAL/SECAM/MESECAM/PAL-N)
REVERSE
X9
REVERSE
X7
(SP on All Systems)
(SLP on NTSC/PAL-M)
REVERSE
X3
REVERSE
PLAY
REVERSE
SLOW
(1/5)
SLOW
(1/5)
SLOW
(1/10)
PLAY
PLAY
X2
PLAY
X7
PLAY
X9
REVERSE
X15
REVERSE
X9
REVERSE
X5
REVERSE
PLAY
REVERSE
SLOW
(1/5)
SLOW
(1/5)
SLOW
(1/10)
PLAY
PLAY
X2
PLAY
X9
PLAY
X15
REVERSE
X15
REVERSE
X9
REVERSE
X7
REVERSE
PLAY
REVERSE
SLOW
(1/5)
SLOW
(1/5)
SLOW
(1/10)
PLAY
PLAY
X2
PLAY
X9
PLAY
X15
REVERSE
SLOW
(1/10)
STILL
STILL
STILL
REVERSE
SLOW
(1/10)
REVERSE
SLOW
(1/10)