Samsung SP-H03 - Manual (Page 26)

2-12 Installation and Connection
To disconnect the projector from a PC.
Make sure to end the connection properly to prevent damage to the projector or your data.
1. Click on the Windows Taskbar.
2. Click the pop-up message.
3. Disconnect the USB cable only when the message says that it is safe to remove the hardware.
• Do not disconnect the USB cable while the files are being copied, as this could result in loss of data or damage to
the projector.
• The connection will not end if you have projector files open on the PC. Close all projector files and try again.
• Other versions of Windows operate similarly. Follow the correct procedure for removing a USB device from your PC
safely for your version of Windows.