Operating the receiver, Main menu, Installation – Sony MF68-00258A User Manual
Page 17
T
E
L
L
I
T
E
R
E
C
E
I
V
E
R
GB-15
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and STB with appropriate connectors.
●
Plug in the AC main power and switch on the receiver.
●
Press MENU key to bring up the main menu.
The LED display will show "MENU".
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus 1, 2 and 3 you need the PIN Code.
●
You must follow the help message at the bottom
of the screen!
Before you begin with the "Installation" menu,
you should check in the 4th menu "System Setup"
whether all the information there is applicable for you.
1. Installation
The menu provides settings for customizing, adding new
services and displaying the status of the receiver.
●
Select "Installation" in the main menu mode to
select the sub menu.
●
Enter the PIN Code.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 15