Sony Ericsson MW600 - Manual (Page 12)

Calling
To make a call
• Dial the number using the phone keys. The call is automatically activated in the
headset.
To end a call
• Press briefly.
To make a call using voice commands
• Press briefly, wait for a beep and then say the command.
To answer a call
• A beep indicates an incoming call. Press briefly.
To reject a call
• Press and hold down until you hear a beep.
To re-dial a number
• Double-click .
To answer a second call
• Press . The ongoing call is put on hold.
To switch between two calls
• Press and hold down until you hear a beep.
To mute the microphone during a call
• Press and hold down until you hear a beep.
Calling using voice commands
Voice commands can be useful when you are using the headset. For more information on
voice commands, and if your phone supports calling using voice commands, see Voice
control in the phone User guide.
Transferring sound
To transfer the sound from the headset to the phone
• See Transferring sound to and from a Bluetooth handsfree in the phone User guide.
To transfer the sound from the phone to the headset
• During a call on the phone, press .
Using another device for calling
Before you can use another device for calling, the headset has to be paired with the device.
The headset can be paired with up to three devices. Every time a phone is paired, this
device becomes the calling device automatically.
Only one of the paired devices can be selected as a calling device at the same time.
To select a calling device
1 Press and hold down until the calling device selection menu appears.
2 Use the touch volume control to select a calling device.
12
This is an Internet version of this publication. © Print only for private use.