Sherwood R-956 - Manual (Page 22)

2 2
Downmixing into 2 front channels
The cancel the 2-CH downmix mode, select the
desired surround mode.
When play is stopped or interrupted, etc., the 2-CH
downmix mode is not canceled even though the
“STEREO” and “DTS” or “DOLBY DIGITAL”
indicators go out.
DTS and Dolby Digital multi-channel program
material will be heard automatically in the 2-CH
downmix mode if headphones are plugged in and
the SPEAKER button is set to off. However, only
the DTS or DOLBY DIGITAL indicator will be
illuminated. Unplugging the headphones and setting
the SPEAKER button to on will restore the previous
mode. Allows the multichannel DTS or Dolby Digital signal
to be reproduced through only two speakers or
through headphones.
When playing the DTS or Dolby Digital program
sources, press the STEREO button.
The “STEREO” and “DTS” or “DOLBY DIGITAL”
indicators light up indicating that the program has
entered the 2-CH downmix mode and the 5 discrete
channels (left front, center, right front, left surround
and right surround) are mixed down to the 2 front
channels.
ENGLISH
or
STEREO
SE TUP
AUD
SAT
VOL
VID 4
SE TUP
P.SCAN
VOL SLEEP CH LEVL
HOME THEATER MASTER RNC-30
PWR
ENTER
PHONO CD TUNER TAPE MON
T2 MON VID SEL VID 2 VID 3
VID 4 AUX ROOM 2 SYS DISP
AUD CD DVD AUX
TV VCR CBL SAT
1 2 3
4 5 6
7 8 9
MUTE 0 CH SEL
T.TONE
D.TIME D.ADJ
STEREO AUTO
6.1CH IN DSP MODE
OSD
STEREO