Standard Horizon MAX CPF180I - Manual (Page 133)

CPF180i and CPF300i Page 135
20.2 FF MODULE SPECIFICATIONS
Power Output : 600W (4800Wpp), 50/200KHz Dual Frequency
Max Depth : 213m (700Ft) at 200kHz, 457m(1500Ft) at 50kHz
Automatic Recognition of the AIRMAR “X-DUCER ID” transducer for best performance
Advanced Digital Signal Processing
Speed & Temperature Sensor (if available on transducer)
Alarms (shallow water, depth, Fish, temp)
Trip Log, Fish Symbols
STC, Interference Rejection, Automatic noise reduction
A-scope, White Line, Zoom x2/x4
Auto range/gain/frequency/shift/ping rate
20.3 OPTIONAL WAAS GPS RECEIVER SPECIFICATIONS
This optional WAAS GPS Receiver is based on a ultimate GPS engine that delivers
accuracy better than three meters by decoding the GPS correction signals from the satellite-
based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics
and the passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color
Ivory white
Dimensions 97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
Weight (without cable) 0,35 lb (160 g)
Cable white 15 meter 8x28AWG cable with 6 pins female connector
Electrical Characteristics
Input Voltage
10 Vdc to 35 Vdc unregulated
Input Current 0.8 Wmax
GPS Receiver Sensitivity Tracking, Navigation :-160 dBm
Acquisition, Reacquisition :-160 dBm
Cold Starts
:-145 dBm
GPS Performance
GNSS Systems
GPS : L1 C/A
GALILEO : L1
SBAS : WAAS (North America), EGNOS (Europe), MSAS (Asia),
GAGAN (Indian)
Geodetic Datum WGS84
Channels 32 + 18
Acquisition Time
Reacquisition
< 1 second
Hot Start 1 second outdoor, 10 seconds indoor
Warm Start 29 seconds
Cold Start 29 seconds
Accuracy
GPS
< 2.5m
with SBAS < 2.0m
NMEA Output
Messages
GGA, RMC, GSA, GSV, TXT