页面 7, Preparations, Power connection – Sanyo LCD-47XR8DA User Manual

Page 7: Antenna connection

Advertising
background image

5

Preparations

(continued)

Insert the AC plug into a conveniently located AC outlet.

=

This product should be operated only from the type of power source indicated on the marking label.

=

Always unplug the AC cord from power outlet when not using for a long period of time.

Power Connection

Note

75-ohm coaxial cable (round cable)

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.

=

It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.

=

The antenna cable should not be bundled with the power cord.

TV REAR

RF

Antenna Connection

Note

Advertising