Sharp Aquos LC 46D62U - Manual (Page 21)

20
ENTER
: Select : Enter
MENU
: Exit
RETURN
: Back
On-Screen Display
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for
this item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates an item can be selected.
4 Item displayed in grey
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are as follows:
— Nothing is connected to the selected input terminal.
— The function is not compatible with the current input
signal.
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Example
MENU [Option ... Digital Noise Reduction]
Option
Audio Only
Digital Noise Reduction
Input Select
Color System
[Off]
[VIDEO]
Output select [Fixed]
[Auto]
[No] Program Title Display
Caption Setup 3
4
2
1
Basic adjustment settings
Menu operation buttons
Use the following buttons on the remote control to
operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting.
RETURN: Press to return to the previous step.
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.