Basic operations, B recording, Initializing a disc (initialize) – Sony CD300 User Manual
Page 18
filename[D:\WORKS\CD\3067951111\3067951111MVCCD200UC\02GB-
MVCCD200UC\04bas.fm]
masterpage:Left
18
model name1[MVC-CD200/CD300]
[3-067-951-11(1)]
Basic operations
B
Recording
Initializing a disc (INITIALIZE)
When you use a new disc or the disc which was finalized with other equipment than
this camera (page 32), you have to initialize the disc. Before initializing the disc,
push the POWER switch in the arrow direction to turn on the power and insert the
disc.
To cancel the initialization
Select [CANCEL] with
V
on the control button, then press the center
z
.
To initialize after canceling the initialization
Open and close the disc cover. Or set the mode dial to
, S, A, M, SCN, or
,
press
v
on the control button, then press the center
z
.
1
Set the mode dial to
, S, A, M, SCN, or
.
“INITIALIZE PLACE ON LEVEL SURFACE” appears on the LCD screen.
Be sure to avoid any vibration during the initialization in step
2
.
2
Select [OK] with
v
on the control button, then press the center
z
.
Initialization starts.
1
2
INITIALIZE
AVOID ANY VIBRATION
READY TO INITIALIZE
INITIALIZE
AVOID ANY VIBRATION
INITIALIZE IN PROGRESS
INITIALIZE
INITIALIZE COMPLETE
01cov.book Page 18 Thursday, March 8, 2001 4:59 PM