Samsung iDCS500 - Manual (Page 23)

Samsung iDCS500 SLT User Guide
–17–
CALL PARK AND PAGE
When you have an external call for someone who is away from their desk, you can
park the call and page the requested party:
1. While in conversation, press Recall and dial 55. The call is automatically
parked at your station.
2. Dial the desired page zone and announce the parked call. Be sure to in-
clude your station number (for example, “Mr. Smith, park 201”).
RETRIEVING A PARKED CALL
To retrieve a call that has been parked for you:
1. Lift the handset.
2. Dial 10 plus the station number that was announced. You will be connected
to the parked call.
MESSAGE WAITING INDICATIONS
You can inform another station user that you wish to speak with them by leaving a
message waiting indication at their station. Other users may leave message waiting
indications at your station.
n
SETTING A MESSAGE WAITING INDICATION
When you are calling another station and no one answers or you receive a busy
signal, you can set a message indication at that station. The MESSAGE key on a
digital keyset will flash and a standard (single line) telephone will receive a special
‘message waiting’ dial tone.
1. Press Recall and dial 43.
2. When you hear confirmation tone, hang up.
If calling a keyset which is in Auto Answer mode, you must use the following pro-
cedure:
1. Hang up for at least two seconds.
2. Lift the handset.
3. Dial 41 plus the extension number.
4. When you hear confirmation tone, hang up.
Note: A station can have up to five message indications at a time. If you hear dial tone
instead of confirmation tone, there are already five messages at this station. Try again
later.