Installation of the water dispenser line – Samsung DA99-01278C User Manual

Page 30

Advertising
background image

30

WATER

ICE

2) When you press the test button, the ice cube container is

filled with water from the water supply tap.

Check the amount of water (see the illustration below).

If the water level is too low,

the ice cubes will be small.

This is not a problem with the ice maker

but of the water pressure in

the pipe, and occurs frequently.

When this problem occurs, contact

a service person to check the

amount of water supplied.

INSTALLATION OF THE WATER DISPENSER LINE

Remove any residual matter inside the water supply line after installing filter.

Check the amount of water supplied to the ice tray.

1) Lift up (

①) and pull out (➁) the ice maker bucket in the freezer.

ICE MAKER

1) Turn on the main water supply & shut-off the valve of the

water supply line.

2) Run water through the dispenser about the first six glassfuls

of water. This will clean the water supply system and clear

air from the lines.

3) Additional flushing may be required in some households.

4) Open the refrigerator door and check if water leaks around

the water filter.

• A newly-installed water filter cartridge may cause water to briefly spurt from the dispenser.
• Before reinstalling the water filter, remove the wine shelf (Optional).

NOTE

CHECK THE WATER LEVEL

TEST BUTTON

TOO HIGH

OPTIMUM
LEVEL

TOO LOW

Advertising