Silvercrest KH2610 08/2009-V3 - Manual (Page 23)

Handling and operation
25 KH 2610
GB
Slide the holder with the fi lm strips and/or slides to be scanned ‹
into the slot 3 on the device until it locks into place.
The scan motif will be displayed in the preview fi eld (3).
NOTICE
A holder that has been inserted into the device cannot be ►
pulled out again, it has to be pushed completely through the
device.
Adjust the holder, if required, until the scan motif is displayed ‹
optimally in the preview window.
Set, if required, the brightness and the colour settings by pressing ‹
on the "Colour/Brightness" button. A settings window will be
opened.
Click on to increase the brightness and/or the corresponding
pigment content and on to decrease the brightness and/or
corresponding pigment content.
NOTICE
When scanning negatives with ► the brightness/pigment con-
tent will be decreased and with they will be increased.
Click on the button "Exit" to exit the settings.
IB_KH2610_37970_LB3A.indb 25 26.10.2009 12:35:11 Uhr