Siemens HT-Q100 - Manual (Page 19)

ENG
36
DVD
DVD
2 Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
1 Press ZOOM but-
ton.
• Each time the button is pressed, the
zoom level changes as follows:
3 Press ENTER but-
ton.
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and bot-
tom of the TV screen can be removed by pressing the
EZ VIEW button.
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
• This feature is not supported for DivX discs.
35
DVD
2 Press Cursor but-
ton to move to
ANGLE ( ) display.
Press INFO button.
1/3
• Each time the button is pressed, the angle changes as follows:
3
Press Cursor , or numeric buttons to
select the desired angle.
2/3
3/3
1/3
1/3
• The Angle function works only with discs on which multiple
angles have been recorded. Note
Note
• When a DivX disc is being played, only the 2:1 zoom-in is available. Note
OPERA
TION
EZ VIEW OFF EZ VIEW
SELECT ZOOM POSITION
Step Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
EZ VIEW Function
DVD
Press STEP button.
• The picture moves forward one frame each time the button is pressed
during playback.
This function allows you to view the same scene in different angles.
Angle Function
1
• No sound is heard during slow playback and step motion
playback. Note
1p~40p(Q100)-XAA 2006.4.18 12:22 PM Page 38