Symphonic WF802 User Manual
Page 15
– 15 –
EN
1L25
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS SUCH AS MD DECK OR DAT DECK
Use an audio coaxial digital cables (not included) for the audio connections.
Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
ANT - IN
IN
DVD/VCR
OUT
DVD/VCR
AUDIO OUT
L
L
COAXIAL
S-VIDEO
OUT
DIGITAL AUDIO OUT
PCM / BITSTREAM
R
R
AUDO
VIDEO
CH3 CH4
ANT - OUT
To COAXIAL DIGITAL
AUDIO INPUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
Notes
¡
The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
¡
Be sure to turn off the power to all components in the system before connecting another component.
¡
Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.
¡
Set Dolby Digital to off for audio output in the setup mode. Playing a DVD disc using incorrect settings may
generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital to on)
[Fig. 4]