Woodstock SHOP FOX D4033 - Manual (Page 2)

-2-
D4033 Drill Press Table Instructions
1
2
3
4
5
6
7
8
8
10
11
12
13
14
15
16
17
REF PART # DESCRIPTION
1 XD4033001 CLAMP BAR
2 XD4033002 TAPE SCALE
3 XD4033003 KNOB
4 XD4033004 TABLE INSERT
5 XPW01M FLAT WASHER 8MM
6 XD4033006 HOLDDOWN
7 XD4033007 STUD
8 XPFH39 FLAT HEAD SCR 6-32 X 7/16
10 XD4033010 THREADED FLANGE
11 XD4033011 T-SLOT BOLT M8-1.25 X 75
12 XD4033012 T-SLOT BOLT M8-1.25 X 35
13 XD4033013 KNOB M8-1.25
14 XD4033014 TABLE
15 XD4033015 STOP BLOCK
16 XD4033016 FENCE
17 XD4033017 T-TRACK
Parts
Maintenance and Care
• Keep your cast iron drill table and column rust-
free with regular applications of a high-quality rust
preventive product.
• To avoid condensation and rust between the two
tables, do not leave the Model D4033 table mounted
on the drill press table for long periods of time.
• Clean the Model D4033 drill press table by
vacuuming out T-slots when finished and wiping
down the table and fence with any good household
glass cleaner. Periodically lightly oil the hand knob
threads and the studs.
Operation
• Periodically verify the mounting clamps are snug,
and never overtighten the hand knobs.
• To avoid drilling into the table, make sure that the
drill press depth stop and drill bit alignment are
correct.
• Use the table only in dry environments.
• Wipe down workpieces to ensure they are free of
debris that may scratch the table.
• Remove the center plate (#4 in Parts) from the table
if you need to perform a through-drilling operation.