Siemens GIGASET SX255 - Manual (Page 27)

26
Connecting devices
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / devices.fm / 09.10.2003
Connecting devices
Connecting cord-based analogue devices
The internal phone numbers Int.21/Int.22 are pre-assigned to the TAE connections.
Devices connected to them must
◆ not be registered on the base.
◆ be set to tone (DTMF) dialling (pulse dialling not supported).
In addition, the corresponding device type must be set and device-specific additional
settings made.
No costs are displayed on the connected devices. However, accumulated costs are
recorded on the base and can be checked using an added-feature handset or on a PC.
Device types
The following settings are possible (Defining the device type, see Page 29).
Connecting telephones
By default, the two TAE connections are set to Telephone.
This means that the base is ready to use with a telephone (with tone dialling/DTMF) con-
nected to Int.21 or Int.22 even without a handset.
If you also want to use this telephone to make internal calls, automatic line seizure for
the associated TAE connection must be deactivated. For external connections, it is then
necessary to dial a zero first.
Information on making calls using devices on the TAE connection can be found in the
handset operating instructions.
◆ Telephone
see Page 26, Connecting telephones
◆ Fax
see Page 27, Connecting a fax machine
◆ Modem see Page 27, Connecting a modem
◆ Answering mach. see Page 27, Connecting an answering machine
◆ Neutral see Page 27, Connecting a fax machine
◆ Door type1 see Page 31, Connecting door type 1
◆ Doortype2(DTMF) see Page 32, Connecting door type 2
◆ No function see Page 28, No device connected
i
Note the explanations below for the device types and their additional
device-specific settings.