Sierra Housewares S5012 - Manual (Page 30)

3
Arm/ Bypass
26
Quick
Bypassing
Quick bypassing allows you to
bypass zones without entering
a user code. This option must
be programmed into your sys-
tem by the installer. With quick
bypassing, any user can by-
pass any bypassable zone.
IMPORTANT: If your system
is programmed for quick by-
passing, anyone can bypass
your system's zones. Since
bypassed zones are not pro-
tected, this feature increases
the likelihood that your system
may be defeated.
To Bypass a Zone with Quick
Bypassing:
1. When a zone is faulted, the
display reads:
FAULTED ZN ##
ZONE LOCATION
2. To bypass the zone, press the
key. You see:
ZONE NUMBER?
ENTER 2 DIGITS
3. Enter the two-digit zone
number. (For zones 1-9, en-
ter a "0" first.)
To Restore a Bypassed Zone
with Quick Bypassing:
Repeat the procedure above.
The zone operates normally.