Sony VRD-VC10 - Manual (Page 17)

17
St
an
d-
al
on
e O
p
e
ra
tio
n
-
U
s
in
g
th
e D
riv
e
as a D
V
D
R
e
co
rd
er
6
Start playback on the video device.
[Recording] appears on the display window and the REC button lights up
during recording.
[SIG] on the display window indicates that the drive is receiving signals from
the video device.
• Recording stops automatically when playback ends.
• When the video signal is interrupted, the drive pauses. If the drive detects
no video signals after 2 minutes, it stops.
7
Press STOP to stop recording.
[STOP] appears on the display window, and the drive stops recording
automatically. Wait for a moment until [Ready] appears.
Note on using a DVD+R disc
To play a recorded DVD+R on DVD devices, you need to finalize the disc after
recording (p. 22).
To pause recording
Press PAUSE. [Pause] appears on the display window.
To resume recording, press REC or PAUSE again.
Recording pauses also when you stop playback on the video device. To resume
recording, restart playback.
To check the time passed or remaining
Press TIME.
Each time you press TIME, the time passed within the current title or the time
remaining within the disc appears in turn.