Sony DVP-NC800H - Manual (Page 36)

36 US
Adjusting the Delay
Between the Picture and
Sound
(AV SYNC)
When the sound does not match the pictures
on the screen, you can adjust the delay
between the picture and sound.
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
(AV SYNC), then press ENTER.
The following display appears.
3
Press x to select “SET c”, then
press ENTER.
The “AV SYNC” adjustment bar
appears.
4
Press c repeatedly to adjust the
delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
5
Press ENTER.
The selected setting takes effect.
To reset the “AV SYNC” setting
Press CLEAR in step 4.
Notes
• This function is not effective if you use the
DIGITAL OUT (OPTICAL or COAXIAL)
jack, and set “DOLBY DIGITAL” or
“DTS” in AUDIO SETUP to “DOLBY
DIGITAL” or “ON” respectively (page 59).
• This function is not effective if you connect
a Dolby Digital or DTS-compliant device
via the HDMI OUT jack, and set “DOLBY
DIGITAL” or “DTS” in AUDIO SETUP to
“DOLBY DIGITAL” or “ON” respectively
(page 59).
STOP
DVD VIDEO
0 ms
SET
AV SYNC 0ms