Sanyo DC-DA1465M - Manual (Page 8)

7
Folder/File selection
1. In stop mode or during play, press the FOLDER/CHANNEL + or -
button to select the desired folder.
2. Press the e or f button to select desired track. Then press the
i button to start play.
In playing mode, play starts automatically.
Repeat / Random play
Press the PLAY MODE button repeatedly before or during play to select
various play modes available.
Each time the button is pressed, the play mode changes as shown
below:
" "appears
(Repeat selected single
MP3/WMA fi le)
" ALL" appears
(Repeat all MP3/WMA fi les or
programmed MP3/WMA fi les)
" " appears
(Play all MP3/WMA
fi les randomly)
Released
(Normal play mode)
v
v
v
" FOLDER" appears
(Repeat all MP3/WMA files
in the folder)
v
- Random play will not function during programmed play.
PROGRAMMED PLAY
1. In stop mode, press the PROGRAM/CLOCK button.
2. Press the FOLDER/CHANNEL + or - button to select desired folder.
3. Press the f or e button to select desired fi le.
4. Press the PROGRAM/CLOCK button.
5. Repeat 2 ~ 4 steps to programme additional tracks.
6. Press the i button to start programmed play.
7. Press the n button at any time to stop the programmed play.
- To cancel programmed play, press the n button twice during play.
Note:
Other various playback operations, please refer to the descriptions in
CD PLAY (page 6).
v
Limitations on the display
Available letters for display are the following: capital alphabets of A
through Z, numbers of 0 through 9, and _ (underline).
MP3 CD directory sample:
Play order: song01 v song02 v ... v song14
Folder number F01 There is no MP3 file.
The unit skips it.
song01.mp3
song02.mp3
song03.mp3
song04.mp3
song05.mp3 douc01.doc
photo01.jpg
song06.mp3
song07.mp3
song08.mp3
song09.mp3
song10.mp3 song11.mp3
song12.mp3
song13.mp3
song14.mp3
MP3 CD
F01 albumF01
F02 albumF02
F04 albumF03
F03 albumF04
Note:
- Some MP3/WMA CDs cannot be played depending on the recording
conditions.
- The CD-R/RW that has no music data or non-MP3 fi les cannot be
played.
- Do not make an empty folder. It may not work correctly.
Basic playback
1. Load the MP3/WMA CD.
“READING” blinks, then the total folder number and total track
number appear on the display.
Example: For an MP3 and WMA mixed CD.
2. Press the FOLDER/CHANNEL + or - button to select the desired
folder.
3. Press the e or f button to select the desired track.
4. Press the i button to start play.
Note:
For the MP3 and WMA mixed CD, both “WMA” and “MP3” remain on the
display except playing mode.
If current playing track is MP3 fi le, only “MP3” appears.
If current playing track is WMA fi le, only “WMA” appears.
Display selection
The ID3-Tag is an information fi eld for MP3/WMA. Album name, music
title and artist name can be stored into the tag. This unit shows this
information.
Press the DISPLAY button on the remote control during play.
Each time the button is pressed, the display changes and scrolls over on
the display in the following sequence:
ALBUM( album name)vARTIST(artist name)vTITLE(music title)...
-
After the information scrolls over, the playing display returns.
1465AUEnglish.indd 7 1465AUEnglish.indd 7 2008-7-28 10:00:20 2008-7-28 10:00:20