Sony SLV-D350P - Manual (Page 62)

62 A/V Receiver hookup
B Use this hookup if your A/V receiver has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
this player. You must make connections using
and .
∗
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “AUDIO SETUP” menu (page 65). Otherwise, no sound or a loud
noise will come from the speakers.
B-1 B-2
1
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Center
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
and
Coaxial digital
cord (not supplied)
l : Signal flow
Stereo audio
cord (not
supplied)
(red) (white)
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
or to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Optical digital cord (not
supplied)
Remove jack cap
before connecting