Normal copying, Using the document glass, Making copies – Sharp AL-1655CS User Manual
Page 26
24
3
Chapter 3
This chapter explains basic copying functions.
NORMAL COPYING
Using the document glass
1
Open the RSPF, and place the original face down on the
document glass.
[How to place the original]
Align the original with the original scale and the
centering (
) mark.
2
Gently close the RSPF.
3
Select the number of copies and any other copy settings, and
then press the [START] key (
).
Copying books or originals with folds or creases
Press down on the RSPF while copying as shown. If
the RSPF is not completely closed, shadows may
appear on the copy or it may be fuzzy. Straight
originals with folds or creases well before placing.
• The document glass can scan up to a 8-1/2" x 14" original.
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the "SPECIFICATIONS" (p.93).
• To stop copying in the middle of a run, press the [CLEAR] key (
).
• For the copy settings, see pages 27 through 29.
Note
mark
Original scale
Note
MAKING COPIES
AL-1655CS.book 24 ページ ２００４年８月２２日 日曜日 午後６時４４分