Sharp MD-S301 - Manual (Page 7)

■ Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of disuse, be sure to
charge it fully.
1
Open the rechargeable battery com-
partment cover.
2
Insert the rechargeable battery.
● Insert the side with the arrow first.
3
Close the rechargeable battery com-
partment cover.
4
Plug the AC adaptor into the AC outlet,
and then insert the plug on the AC
adaptor cord into the DC IN 5V jack.
5
Press the ■ :OFF button to begin charg-
ing.
● The POWER indicator will flash, and
the battery will begin charging.
● Battery charging will be complete in 3
hours. When the battery is fully
charged, the POWER indicator will go
out.
1
2
POWER SOURCE
Notes:
● After charging is complete, the AC
adaptor may be left connected.
(For example, when charging at night)
● The battery will not be charged when-
ever the power to the main unit is
turned on.
● If the operation in step 5 is performed
without inserting the rechargeable bat-
tery, the POWER indicator will flash for
5 seconds. This is normal.
● Do not force open the rechargeable
battery cover too far.
● Do not attach the optionally available
battery case when charging the internal
battery.
This unit can be used with 4 different power sources: a rechargeable battery, an AC
adaptor, an optionally available battery case (AD-S30BC), and an optionally available car
adaptor (AD-CA20X).
OPEN OPEN
Mark
To the
DC IN 5V
jack
AC 120V, 60 Hz
OPEN
OFF
POWER
5
Insert
securely,
all the way
in.
4
6
MD-S301