Sprint Nextel PCSVISIONPHONE SCP-3100 - Manual (Page 151)

Section 2I: Using Your Phone’s Built-in Camera 135
C
amer
a
Setting the Self-Timer
To activate the Self-Timer:
1. From camera mode, select Options (right softkey) >
Self-Timer.
2. Highlight the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press
.
3. Select Start (left softkey) when you are ready to start the
timer. (
appears on the lower left portion of the Main
LCD during the Self-Timer countdown.)
4. Get ready for the picture. (When the timer is down to
three seconds, the Self-Timer icon will turn red and the
phone will begin to beep.)
To cancel the Self-Timer after it has started:
ᮣ Press Cancel (right softkey).
Note: While the Self-Timer is active, all keys are disabled except , ,
and the right softkey button ( Cancel ).
Using the Zoom
This feature allows you to zoom in on an object when you take
a picture. Depending on your resolution settings, you can
adjust the zoom from 1x to 20x.
To use the zoom:
1. From camera mode, press the navigation key right or
left, or the side volume key up or down to adjust the
zoom. (The gauge bar appears.)
2. Press Capture (left softkey), , , or the side camera
key to take the picture. (The picture will automatically
be saved in the In Camera folder.)
Note: The Zoom gauge will not appear when the resolution setting is High.