Service intervals, Servicing your machine, Intervals – Sabo 108-17 HS User Manual
Page 30: Before each use, After first 5 hours, Every 25 hours, Every 50 hours, Every 100 hours, Before storage
Service Intervals - 26
SERVICE INTERVALS
Service Intervals
Servicing Your Machine
Please use the following timetables to perform routine
maintenance on your machine.
Intervals
Before Each Use
•
Check fuel level.
•
Check engine oil level.
•
Clean air intake screen.
•
Check safety systems.
•
Check tire pressure.
•
Check/tighten loose hardware.
After First 5 Hours
•
Change engine oil.
•
On 107 cm (42 in.) deck: Check and adjust mower deck
belt tension.
•
On 107 cm (42 in.) deck: Check and adjust mower deck
spindle brakes.
•
Lubricate front axle pivot.
•
Lubricate front wheel spindles and wheel bearings.
Every 25 Hours
•
Change engine oil. (Service more frequently under
dusty conditions).
•
Replace oil filter.
•
Check/clean battery.
•
Clean/replace air cleaner element and precleaner.
(Service more frequently under dusty conditions).
•
Clean engine cooling fins.
•
Replace fuel filter.
•
Replace spark plug.
•
Sharpen/replace blades.
•
Clean mower deck.
•
Level mower deck.
•
On 107 cm (42 in.) deck: Check and adjust mower deck
belt tension.
•
On 107 cm (42 in.) deck: Check and adjust mower deck
spindle brakes.
•
Lubricate front axle pivot.
•
Lubricate front wheel spindles and wheel bearings.
Every 50 Hours
•
Lubricate pivot points and seat with general all-purpose
spray lubricant. (See Lubricating Pivot Points and
Lubricating Seat in the SERVICE LUBRICATION section.)
Every 100 Hours
•
Replace mower drive belt.
•
Sharpen/replace blades.
Before Storage
•
Change engine oil.
•
Replace oil filter.
•
Check/clean battery.
•
Charge battery.
•
Clean/replace air cleaner precleaner.
•
Check/replace air cleaner element.
•
Clean air intake screen.
•
Clean engine cooling fins.
•
Replace fuel filter.
•
Replace spark plug.
•
Add fuel stabilizer.
•
Sharpen/replace blades.
•
Clean mower deck.
•
Level mower deck.
•
On 107 cm (42 in.) deck: Check and adjust mower deck
belt tension.
•
On 107 cm (42 in.) deck: Check and adjust mower deck
spindle brakes.
•
Check safety systems.
•
Check/tighten loose hardware.
•
Check tire pressure.
•
Lubricate front axle pivot.
•
Lubricate front wheel spindles and wheel bearings.
•
Lubricate pivot points and seat with general all-purpose
spray lubricant. (See Lubricating Pivot Points and
IMPORTANT: Avoid damage! Operating in extreme
conditions may require more frequent service
intervals:
•
Engine components may become dirty or
plugged when operating in extreme heat, dust or
other severe conditions.
•
Engine oil and spark plugs may lose efficiency if
machine is operated constantly at slow or low
engine speeds or with frequent short trips.