SUPER MICRO Computer SUPERSERVER 6015B-3 - Manual (Page 42)

5-8
S UPER S ERVER 6015B-3/6015B-T User's Manual
Figure 5-3b. Top View of DDR Slot
Figure 5-3a. Installing DIMM into Slot
To Install: Insert module vertically and press down until it snaps into place. Pay attention to
the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward to free the DIMM from
the slot.
Memory Support
The X7DBR-3/X7DBR-E supports up to 32 GB of ECC FBD (Fully Buffered DIMM)
DDR2-667 or DDR2-533 SDRAM. The memory is an interleaved confi guration,
which requires modules of the same size and speed to be installed in pairs. You
should not mix DIMMs of different sizes and speeds. See Figure 5-3 for installing
and removing memory modules.
Note: Notch
should align
with its
receptive point
on the slot
Notch Notch
Release
Tab
Release
Tab