User instructions – Smeg EN User Manual

Page 26

Advertising
background image

User instructions



CLEANING THE FILTER UNIT
• The

filter

H should be periodically removed and inspected, and if

necessary, cleaned. To remove the filter, take hold of the handle
and turn clockwise, then lift upwards.

• Then

separate

parts

L and M, and separate the two parts of the

plastic filter by pressing gently in the points shown, lifting it upwards
to extract it.

• Remove the centre filter by lifting it upwards.

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT
MAINTENANCE:

•

The filters should be cleaned under running water using a stiff
brush.

•

It is essential to thoroughly clean the filters according to the
above instructions: the dishwasher cannot function if the filters are
clogged.

•

Carefully replace the filters in their seats, to avoid damaging the
wash pump.

PROLONGED DISUSE:

•

Run the soak program twice in succession.

•

Unplug the power cord from the socket.

•

Leave the door slightly open, in order to prevent the formation of
unpleasant odours inside the washing tank.

•

Fill the rinse aid dispenser.

•

Shut off the water supply tap.

Advertising