Using the menus – Sharp AR-C360P User Manual
Page 36
Sharp AR-C360P User’s Guide
Control panel > 36
Using the menus
NOTE
Menu details are given in
for reference.
The Enter, Up-arrow, Down-arrow and Back buttons are used to
move through the printer menus. You can adjust settings (e.g. set
the paper size for Tray 1) or view information (e.g. how much is left
of a selected consumable).
Many of these menu settings can be, and often are, overridden by
settings in the Windows printer drivers. However, several of the
driver settings can be left at "Printer Setting," which will then default
to the settings entered in these printer menus.
The steps involved in using the menus are typically as follows:
1.
Ensure that the display panel indicates that the printer is
ready to print.
2.
Enter User menu mode by pressing either the Enter button
or the Up-arrow or Down-arrow button and press the
latter two repeatedly until the desired menu is highlighted in
the displayed list.
3.
Press the Enter button to select this menu.
4.
Press the Up-arrow or Down-arrow buttons repeatedly
until the desired Item is highlighted.
5.
Press the Enter button to select this Item.
6.
Press the Up-arrow or Down-arrow buttons repeatedly
until the desired Value is highlighted.
7.
Press the Enter button to select this Value. (If you are
setting a parameter, ensure that an asterisk (*) appears
beside the selected parameter Value.)
8.
Press the Online button to exit menu mode and return to the
ready to print status.
Refer to the section entitled
and
“Appendix B – Menu system” on page 102
for examples of using the
menus.