Sanyo EP58B - Manual (Page 18)

33 34 SANYO TV . VCR SANYO TV . VCR
LA7849
1 2 3 4 5 6 7 8 9 10
AMP
Pump UP
+
+
-
-
GND
EW OUT
Ver.OUTPUT
OUTPUT STAGE V
CC
NON INV.INPUT
INVERTING INPUT
INVERTING INPUT(EW)
V CC
NON INV.INPUT(EW)
PUMP UP OUT
LA7847/48
1 2 3 4 5 6 7 8 9 10
AMP
Pump UP
+
+
-
-
GND
EW OUT
Ver.OUTPUT
OUTPUT STAGE V
CC
NON INV.INPUT
INVERTING INPUT
INVERTING INPUT(EW)
V CC
NON INV.INPUT(EW)
PUMP UP OUT
Block Diagram Block Diagram
Overview
Functions
Overview
Functions
Vertical Output ICs Vertical Output IC
The LA7847 and LA7848 are EW drive and vertical deflection output ICs for high-definition TV and CRT displays in systems that
use a bus control system signal-processing IC. These ICs can directly drive (including DC component) the deflection yoke from the
sawtooth wave output from the bus control system signal-processing IC. Similarly, the diode modulator block can be driven from the
parabolic wave output.
The color TV vertical deflection system and EW adjustment functions can be controlled from the bus system when either of these ICs
is used in conjunction with a Sanyo LA768X or LA769XX series TV bus control system signal-processing IC. The LA7847 provides
a maximum output block voltage of 72 V, a maximum deflection current of 2.2 A p-p, and an EW drive current of 0.4 A, and thus is
optimal for large diameter CRTs. The LA7848 provides a maximum output block voltage of 92 V, a maximum deflection current of
2.2 A p-p, and an EW drive current of 0.4 A, and thus is optimal for large diameter CRTs.
Built-in charge pump circuit for low power operation
Vertical output circuit
Excellent crossover characteristics
Supports DC coupling
EW drive circuit
Package: SIP10HD
The LA7849 is an EW drive and vertical deflection output IC for high-definition TV and CRT displays in systems that use a bus
control system signal-processing IC. This IC can directly drive (including the DC component) the deflection yoke from the sawtooth
wave output from the bus control system signal-processing IC. Similarly, the diode modulator block can be driven from the parabolic
wave output.The color TV vertical deflection system and EW adjustment functions can be controlled from the bus system when this
IC is used in conjunction with a Sanyo LA768X or LA769XX series TV bus control system signal-processing IC.
The LA7849 provides a maximum output block voltage of 92 V, a maximum deflection current of 2.2 A p-p, and an EW drive current
of 0.4 A, is provided in an SIP10H package, and thus is optimal for large diameter CRTs.
Built-in charge pump circuit for low power operation
Vertical output circuit
Excellent crossover characteristics
Supports DC coupling
EW drive circuit
Package: SIP10H