Samsung SV-661B - Manual (Page 47)

Appendix B. Portable and mobile computer activation
Many mobile computers do not automatically turn on their external video
port when a projector is connected. Activation commands may be required.
The following table lists activation commands. (If your computer is not listed
or the given command does not work, refer to the computer documentation
for the appropriate command.) On many mobile computers, the activation
function key is labeled with an icon such as the following:
Note: For the most current activation chart, visit http://www.infocus.com/. It
is located in the Service and Support section.
Note: Usually, pressing the key commands one time activates the external
video port, pressing it again activates both external and internal ports,
and pressing it a third time activates the internal port. Refer to your
computer’s documentation for details on your specific model.
Computer Key command to
activate port Key command to
deactivate port
Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup)
AST* ** FN-D or Ctrl-D FN-D or Ctrl-D
Ctrl-FN-D Ctrl-FN-D
FN-F5 FN-F5
type from A:\IVGA/CRT type from A:\IVGA/CRT
FN-F12 FN-F12
AMS FN-F2 FN-F2
AMT setup screen setup screen
AT&T FN-F3 FN-F6 FN-F3 FN-F6
Advanced Logic Research Ctrl-Alt-V Ctrl-Alt-V
Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L
setup VGA/Conf.Simulscan setup VGA/Conf.Simulscan
Ambra** FN-F12 FN-F12
FN-F5 FN-F5
F2/Choose Option/F5 F2/Choose Option/F5
Amrel* ** setup menu setup menu
Shift-Ctrl-D Shift-Ctrl-D
© Copyright IBM Corp. 2000 37