Sanyo Xacti VPC-E870 - Manual (Page 51)

Camera Settings 37
The Setup Menu
English
Auto Power Off
The Auto Power Off setting allows you to adjust
the length of time after which the camera will power
down when inactive. Use Up/Down navigation
buttons to select from the menu options. Two
options are available:
• 5 min (default)
• 2 min
Video Out
The Video Out setting allows you to adjust the
video output, depending on the type of your TV.
Use Up/Down navigation buttons to select from
the menu options. Two options are available:
• NTSC (default)
• PAL
USB Mode
The USB Mode setting allows you to select the
transfer method between your camera and your
PC. Two options are available:
• PTP (PictBridge Print): When the camera is
connected to a printer by a USB cable which
supports Pictbridge, it can directly print images
stored on the media. For details on PTP func-
tion, please See “PictBridge Print (PTP)” on
page 40.
• MSDC (default): The camera is set up to act as a mass storage device,
allowing for only transfer of files between your camera and PC.
AUTO POWER OFF
5 MIN
2 MIN
VIDEO OUT
NTSC
PAL
USB MODE
PTP
MSDC