Sony CS SLV-998HF MX - Manual (Page 42)

Setting up the cable box (continued)
To ensure correct operation
* Place the Cable Mouse so that it hangs out over the cable box / DSS
receiver front.
* Do not place the cable box / DSS receiver on top of the VCR.
* Position the cable box / DSS receiver away from the VCR.
* Point the remote commander at the VCR, not at the cable box / DSS
receiver.
To check the cable box control setting
1 Press CH + / - on the remote commander. Does the channel indicator
on the cable box / DSS receiver change? (Point the remote commander
at the VCR, not at the cable box / DSS receiver.)
2 Press all 10 number buttons ( 0 to 9 ) on the remote commander. Does
the channel indicator on the cable box / DSS receiver change?
If the answer to both 1 and 2 is "yes" you have made the correct setting.
42 Getting started