Sanyo VCB-3574IR - Manual (Page 11)

SETTINGS
Control name Position
a Electronic iris (EI)/Backlight compensation
(BLC) switch OFF
b Auto-iris lens switch (A.I. LENS) DC
c Lens iris level volume (LEVEL) about centre
Electronic iris function setting
Use a manual or fixed iris lens and set the lens
aperture to the shortest F stop. Set the EI/BLC
switch to EI-ON position.
Note:
Please refer to the specifications for dynamic
range of the electronic iris.
CAUTION:
• The electronic iris is suitable for normal indoor use. When the EI/BLC
switch is set to the EI-ON position, do not use an auto-iris lens.
• If used under fluorescent light, the image may flicker. In such a
case, change to incandescent lighting or set the EI/BLC switch to
the OFF position and use an auto-iris lens.
• When shooting bright subjects, pay attention to the light angle in
order to avoid or minimize the smear phenomenon effect.
When using an auto-iris lens (for indoor/outdoor use)
Set the EI/BLC switch to the OFF position.
CAUTION:
If conditions are outside the electronic iris operation range or more
than the maximum illumination, it will cause saturation of the CCD. In
that case, use a manual iris lens.
ON
OFF
ON
BLC
L
E
V
E
L
DC
VIDEO
A. I.
LENS
L H
VR401
EI
c
a b
ON
OFF
ON
EI
BLC
L72H4/US GB 1999, 2, 4
10
English