Receiving a fax – Samsung sf 150 User Manual
Page 28
T
HE
F
AX
M
ACHINE
C
HAPTER
T
HREE :
T
HE
F
AX
M
ACHINE
3.5
Receiving a Fax
Reception Modes
Your fax machine has four reception modes:
¥ In FAX mode, the machine answers an incoming call and immediately goes into receive
mode, expecting a fax to be sent.
¥ In TEL mode, automatic fax reception is turned off. You can receive a fax only by
manually pressing Start/Copy.
¥ In AUTO mode, your fax machine will answer faxes automatically. If you want to use
your phone line for both fax and phone, you may want to choose this AUTO mode. If
the machine does not sense a fax signal, it will resume ringing to tell you it is a phone
call. If you do not pick up the handset, it will switch to automatic reception mode.
¥ In TAD mode, you must attach an answering machine to the EXT line socket on your
machine. When the phone rings, the answering machine answers and stores the callerÕs
message. If your machine hears a fax tone on the line, the call automatically switches
over to fax receive.
If you rarely use the fax line for voice conversation, set the machine to receive faxes
automatically by selecting either FAX or AUTO mode.
1
Press RCV.Mode repeatedly
until ÔFAXÕ appears in the
display.
Resolution
Rcv. Mode
Speed Dial
Ã
In FAX mode, when you get a call,
the machine answers the call on the
second ring. You can change the
number of rings. See page 4.10.
When reception is complete, the
machine returns to Standby Mode.
Receiving in FAX Mode
The LCD displays ÔFAXÕ.
03-15 12:30 FAX
Ch-3 3/25/98 6:28 PM Page 6