Installing the printer driver – Sony DPP-FP65 User Manual

Page 35

Advertising
background image

35

GB

Pri

n

ti

ng
from

a
PC

Notes

• If a hub is used to connect the printer and your PC,

or if two or more USB devices, including other
printers, are connected to your PC, trouble may
occur. If this occurs, simplify the connections
between your PC and the printer.

• You cannot operate the printer from another USB

device being used simultaneously.

• Do not remove the USB cable from or connect it to

the printer during data communication or printing.
The printer may not work properly.

• The printer does not support standby, sleep, and

hibernation modes and restarting from those
modes. Do not allow the PC connected to the
printer to switch to one of those modes during
printing.If you do so, printing may be failed.

• When printing is failed, remove a USB cable and

then connect it, or restart your computer. Then try
printing again.

• If you pause a printing job in process, and resume

printing after a while, printing may not be
performed correctly.

• We cannot guarantee operations with all PCs, even

though they may meet or exceed the system
requirements.

• Picture Motion Browser supports DirectX

technology and DirectX installation may be
required.
DirectX is available on the CD-ROM.

• If the Picture Motion Browser is installed on a PC

on which the Cyber-shot Viewer is already
installed, the Cyber-shot Viewer will be
overwritten and replaced by the Picture Motion
Browser. The browsing folders once registered in
the Cyber-shot Viewer will be automatically
registered in the Picture Motion Browser. When
using the Picture Motion Browser, you can view
the folders easier than you can when using the
Cyber-shot Viewer, as the registered folders are
displayed by group when viewing folders. With its
improved red-eye reduction adjustment and newly-
added tone curve adjustment, the Picture Motion
Browser also offers more powerful editorial
features. You can also use the software to write
data onto an external memory card for it.

Follow the procedures below to install the
driver.

Notes

• Do not connect the printer to the PC before

installing the driver.

• Please log on to Windows using a “Computer

administrator” user account.

• Be sure to close all running programs before

installing the software.

• The dialog boxes shown in this section are from

Windows Vista, unless otherwise specified. The
installation procedures and the dialog boxes shown
differ depending on the operating system.

1

Turn on your PC, start Windows,
and insert the supplied CD-ROM
into the CD-ROM drive of your PC.

The installation window is displayed.

Notes

• If the installation window is not displayed

automatically, double-click the “Setup.exe”
file on the CD-ROM.

• In Windows Vista, the AutoPlay window

may appear. Even if this occurs, select
“Setup.exe” execution and install the driver
according to the instructions on the screen.

2

Click “Installing Printer Driver”.

The “InstallShield Wizard” dialog box is
displayed.

Installing the printer driver

Continued

Advertising
This manual is related to the following products: