Sharp AQUOS LC-19SB28UT - Manual (Page 8)

6
Remote control unit (×1)
Page 8
“AA” size battery (×2)
Page 8
AC cord (×1)
Page 7
Stand unit (×1) and
Screws (×3)
Page 6
Operation manual (×1)
NOTE
• Always use the AC cord supplied with the TV.
Supplied accessories
Make sure the following accessories are provided with the product.
QUICK REFERENCE
Attaching the stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
•
•
1 Confirm the 3 screws supplied with the TV.
Screws (
× 3)
2 Remove the covering sheet of the stand.
1
Insert the stand to the bottom of the TV.
2
Insert and tighten the 3 screws into the 3 holes on the
bottom of the stand.
Soft cushion
Screw
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
•
NOTE
• To detach the stand, perform the step in reverse order.
3 For protection, sheets
are covering the product.
Please remove these
sheets before use.
39X0131B_eng.indb 6 39X0131B_eng.indb 6 5/18/10 11:40:30 AM 5/18/10 11:40:30 AM