Samsung SF-750 Series - Manual (Page 37)

B ASIC F UNCTIONS 2.4
Sending a Fax Automatically
1 Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2 Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3 Enter the remote fax phone number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.15.
4 Press Start Copy/Fax.
After the number is dialed, the machine begins sending the fax when
the remote fax machine is ready.
N OTE : When you want to cancel the fax job, press Stop/Clear at any time
while sending the fax.
Sending a Fax Manually
1 Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2 Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3 Press On Hook Dial. You hear a dial tone.
4 Enter the remote fax machine’s fax number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.15.
5 When you hear a high-pitched fax signal from the remote fax machine,
press Start Copy/Fax.
N OTE : When you want to cancel the fax job, press Stop/Clear at any time
while sending the fax.
Redialing the Last Number
To redial the last number you called:
Press Redial/Pause.
If a document is loaded in the ADF, the machine automatically begins to send.