Sennheiser EK 2000 IEM - Manual (Page 6)

5
The EK 2000 IEM diversity receiver
These transmitters are available in the same UHF frequency ranges and are
equipped with the same frequency bank system with factory-preset
frequencies. An advantage of the factory-preset frequencies is that
• a transmission system is ready for immediate use after switch-on,
• several transmission systems can be operated simultaneously on the
preset frequencies without causing intermodulation interference.
The frequency bank system
The receiver is available in 5 UHF frequency ranges with up to
3,000 receiving frequencies per frequency range:
Each frequency range (Aw–Dw, Gw) offers 26 frequency banks with up to
32 channels each:
Each of the channels in the frequency banks “ 1 ” to “ 20 ” has been factory-
preset to a fixed receiving frequency (frequency preset). The factory-
preset frequencies within one frequency bank are intermodulation-free.
These frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied
frequency information sheet. Updated versions of the frequency informa-
tion sheet can be downloaded from the EK 2000 IEM product page on our
website at www.sennheiser.com.
500 600 700 800
Range Gw:
558 – 626
Range Bw:
626 – 698
Range Cw:
718 – 790
Range Dw:
790 – 865 516 – 558
Range Aw:
Frequency bank 1... 20
Frequency bank U1 ... U6
Channel 32 – frequency preset
Channel 1 – frequency preset
Channel 2 – frequency preset
Channel 32 – freely selectable frequency
Channel 1 – freely selectable frequency
Channel 2 – freely selectable frequency