Speco Technologies VL-11 - Manual (Page 2)

Model VL-10 VL-11
Pick Up Device 1/3” Interline transfer CCD
Resolution 420TV Lines
Lens 4.3mm
Total Pixels
NTSC:537(H) x 505(V)
PAL:537(H) x 597(V)
Sync system 2：1 Internal Internal
Scanning system 525 line / 60 frames
Video Output Composite 1.0 Vp-p / 75 ohms
Minimum Illumination 0.5 lux color / 0 lux with IR on
IR Radiant Distance 65 feet 50 feet
S/N Ratio 50dB or more
Electronic Shutter Auto 1/60sec. to 1/100,000dec.
Horizontal Frequency 15.734KHz
Vertical Frequency 59.94Hz 60Hz
Backlight Compensation Built-in (Option
Jumper ON / OFF )
ON / OFF
switchable
Power Supply Regulated 12V DC power supply
required-model PSW-5
Consumption Current Max. 300mA Max. 280mA
Weight 0.46kg convert to
lbs.
0.505kg / 0.56kg
convert to lbs.
Dimensions 2.7” dia x 3.7” H 2.25” dia x 3.25” H
Operating Temp -14 to 122℉
Wall / Ceiling Mount
Included Included
Housing Silver / Aluminum
7
SPECIFICATIONS
INSTALLATION
1. Attach bracket to wall or ceiling.
2. Attach camera to bracket.
3. Aim camera and tighten mounting.
4. Attach a 75 ohm coaxial cable (95% copper shield recommended) to
the BNC output.
5. Apply regulated 12 Volts DC to the power connector.
6
Mount：
Rotate the camera angle as required tighten thumbscrew.
Sunshade：
Adjust as necessary to prevent the sun from hitting the camera
lens, make sure that the sunshade is not in the camera’s field of
view.
Power and video connections：
Power: Regulated 12 Volts DC, center pin is positive (+)
Video: BNC, 1 Volt p-p
5
Scaffold
Sunshade
DC Power BNC Video Output
8
DIMENSIONS
VL-10
VL-11