Servis-Rhino 95HD - Manual (Page 38)

F3788-7-04 Maintenance Section 5-10
MAINTENANCE
MAINTENANCE
USE THE FOLLOWING TORQUES WHEN SPECIAL TORQUES ARE NOT GIVEN
GENERAL TORQUE SPECIFICATIONS
AMERICAN STANDARD CAP SCREWS METRIC CAP SCREWS
SAE
Grade
5 8 Metric Class 8.8 10.9
Cap
Screw
TORQUE TORQUE Cap Screw TORQUE TORQUE
Size FT-LBS Nm FT-LBS Nm Size FT-LBS Nm FT-LBS Nm
Inches MIN MAX MIN MAX MIN MAX MIN MAX Millimeters MIN MAX MIN MAX MIN MAX MIN MAX
1/4-20 6.25 7.25 8.5 10 8.25 9.5 11 13 M6x100 6 8 8 11 9 11 12 15
1/4-28 8 9 11 12 10.5 12 14 16 M8 x 1.25 16 20 215 27 23 27 31 36.5
5/16 - 18 14 15 19 20 18.5 20 25 27 M10 x 1.50 29 35 39 47 42 52 57 70
5/16 - 24 17.5 19 23 26 23 25 31 34 M12 x 1.75 52 62 70 84 75 91 102 123
3/8 - 16 26 28 35 38 35 37 47.5 50 M14 x 2.00 85 103 115 139 120 146 163 198
3/8 - 24 31 34 42 46 41 45 55.5 61 M16 x 2.50 130 158 176 214 176 216 238 293
7/16 - 14 41 45 555 61 55 60 74.5 81 M18 x 2.50 172 210 233 284 240 294 325 398
7/16 - 20 51 55 69 745 68 75 92 102 M20 x 2.50 247 301 335 408 343 426 465 577
½ - 13 65 72 88 975 86 96 116 130 M22 x 2.50 332 404 450 547 472 576 639 780
½ - 20 76 84 103 114 102 112 138 152 MM24 x 3.00 423 517 573 700 599 732 812 992
9/16 - 12 95 105 129 142 127 140 172 190 M27 x 3.00 637 779 863 1055 898 1098 1217 1488
9/16 - 18 111 123 150 167 148 164 200 222 M30 x 3.00 872 1066 1181 1444 1224 1496 1658 2027
5/8 - 11 126 139 171 188 168 185 228 251
NOTE: These values apply to fasteners as
received from the supplier, dry or when lubricated
with normal engine oil. They do not apply if
special graphite or molydisulphide greases or
other extreme pressure lubricants are used.
5/8 - 18 152 168 206 228 203 224 275 304
¾ - 10 238 262 322 355 318 350 431 474
¾ - 16 274 305 371 409 365 402 495 544
7/8 - 9 350 386 474 523 466 515 631 698
7/8 -14 407 448 551 607 543 597 736 809
1 - 8 537 592 728 802 716 790 970 1070
1 - 14 670 740 908 1003 894 987 1211 1337
Assembly Torque
Size
Thread
Size
in. lb. ft. lb.
Tube
Connection
F.F.F.T.
Swivel Nut
or Hose
Connection
F.F.F.T.
-4 7/16-20 140 ± 10 12 ± 1 2 2
-5 1/2-20 180 ± 15 15 ± 1 2 2
-6 9/16-18 250 ± 15 21 ± 1 1 1/2 1 1/4
-8 3/4-16 550 ± 25 45 ± 5 1 1/2 1
-12 1 1/16-12 1000 ± 50 85 ± 5 1 1/4 1
-16 1 5/16-12 1450 ± 50 120 ± 5 1 1
-20 1 5/8-12 2000 ± 100 170 ± 10 1 1
-24 1 7/8-12 2400 ± 150 200 ± 15 1 1
-32 2 1/2-12 3200 ± 200 270 ± 20 1 1
Torque Specifications for
37º JIC Fittings
Assembly Torque
Size
Thread
Size
in. lb. ft. lb. F.F.F.T.
2 5/16-24 90 ± 5 7.5 ± 0.5 1 ± .25
3 3/8-24 170 ± 10 14 ± 1 1 ± .25
4 7/16-20 220 ± 15 18 ± 1 1 ± .25
5 1/2-20 260 ± 15 22 ± 1 1 ± .25
6 9/16-18 320 ± 20 27 ± 2 1.5 ± .25
8 3/4-16 570 ± 25 48 ± 2 1.5 ± .25
10 7/8-14 1060 ± 50 90 ± 5 1.5 ± .25
12 1 1/16-12 1300 ± 50 110 ± 5 1.5 ± .25
14 1 3/16-12 1750 ± 75 145 ± 6 1.5 ± .25
16 1 5/16-12 1920 ± 25 160 ± 6 1.5 ± .25
20 1 5/8-12 2700 ± 150 225 ± 12 1.5 ± .25
24 1 7/8-12 3000 ± 150 250 ± 12 1.5 ± .25
32 2 1/2-12 3900 ± 200 325 ± 15 1.5 ± .25
Torque Specifications for
SAE O-Ring Fittings