Samsung A502 - Manual (Page 82)

《82》
Warning indicator
The camera doesn’t switch on
ㆍThere is low battery capacity
→ Insert fresh batteries
ㆍBatteries are inserted incorrectly with the reverse polarities
→ Insert the batteries according to the polarity marks (+, -)
The camera power ceases whilst in use
ㆍThe batteries are exhausted
→ Insert fresh batteries
ㆍThe Camera is turned off automatically
→ Turn off the camera power and turn it on again
Batteries drain quickly
ㆍThe Camera is being used in low temperatures
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in
order to take images
■ Please check the following
Before contacting a service centre
LOW BATTERY !
ㆍThere is low battery capacity
→ Insert fresh batteries
LOW LIGHT !
ㆍWhen taking pictures in dark places
→ Use a tripod and take pictures in Flash Photography mode
SET USB
ㆍ [USB] sub menu and connected device are not matched.
→ Reconfigure [USB] in the [SETUP] menu.
OUT OF NUMBER
ㆍ When selecting too many printing pages in the PictBridge menu.
→ Select printing page within the limitation.