Siemens Type Vector E50001-F710-A420-X-4A00 - Manual (Page 6)

General description
Introduction
Siemens type Vector® manual group-
operated air switch is precision built
equipment designed to function efficiently
under normal operating conditions. It is
designed and manufactured to operate
within the parameters established in ANSI/
IEEE and NEMA standards for
disconnecting and load-interrupter
switches. Performance requirements of
these standards have been met or
exceeded by these designs. Specific
standards which apply include:
ANSI/IEEE C37.30 Requirements for
High-Voltage Switches
ANSI/IEEE C37.32 High-Voltage
Switches, Bus Supports and Accessories
- Preferred Ratings, Construction
Guidelines, and Specifications
ANSI/IEEE C37.34 Test Code for High-
Voltage Air Switches
ANSI/IEEE C37.35 Guide for the
Application, Installation, Operation and
Maintenance of High-Voltage
Disconnecting and Interrupter Swiches
ANSI/IEEE 1247 Interrupter Switches for
Alternating Current, Above 1,000
NEMA SG6 Power Switching
Equipment.
The instructions included in this instruction
manual are provided to aid you in
obtaining longer and more economical
service from your Siemens type Vector
manual group-operated air switch. For
proper installation and operation, this
information should be distributed to your
operators and engineers.
By carefully following these instructions,
difficulties should be avoided. However,
these instructions are not intended to
cover all details of variations that may be
encountered in connection with the
installation, operation and maintenance of
this equipment.
Should additional information be desired,
including replacement instruction
manuals, contact your local Siemens
representative.
Figure 1: Typical type Vector manual group-operated switch
6