Samsung DVD Television - Manual (Page 11)

11
The mains lead is attached to the rear of your television.
☛
If you have purchased this television in the United
Kingdom, refer to page 60 for further instructions on
plug wiring.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the “ I ” button (On/Off) on the front of the television.
Result: The Standby indicator on the front of the television
lights up.
3 Press the POWER ( ) button on the remote control to switch the
television on.
Result: The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
16 or “Storing Channels Manually” on page 17.
4 To switch your television off, press again the POWER ( ) button
on the front of the television.
Switching Your Television On and Off
ENG
Front of the TV
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER ( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the television back on, simply press again the POWER
(
) button on the remote control.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ l ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
ANGLE RETURN
ANGLE RETURN
C19A_ENG_03185A 12/19/03 8:47 AM Page 11