Flash light (flash control) – Sony alpha DSLR-A500 User Manual

Page 96

Advertising
background image

96

• If you have adjusted the flash level,

appears in the viewfinder when the built-in

flash is pulled up. When you adjust it, be careful not to forget to reset the value.

• The higher flash effect may not be visible due to the limited amount of flash light, if

the subject is outside the maximum range of the flash. If the subject is very close, the
lower flash effect may not be visible.

Exposure compensation and flash compensation

Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when
[AUTO] is selected) to perform the compensation. If the flash is used, the amount of
flash light is also changed.
However, flash compensation only changes the amount of flash light.

MENU button t

1

t [Flash control] t Select the desired

setting

ADI: Advanced Distance Integration
TTL: Through the lens
• When [ADI flash] is selected, using a lens that is provided with a distance

encoder feature can perform more accurate flash compensation by using
more accurate distance information.

Notes

• When the distance between the subject and the external flash (sold separately)

cannot be determined (wireless flash shooting using an external flash (sold
separately), shooting with an off-camera flash using a cable, shooting with a macro
twin flash, etc.), the camera automatically selects Pre-flash TTL mode.

• Select [Pre-flash TTL] in the following cases, as the camera cannot perform flash

compensations with ADI flash.
– A wide panel is attached to the HVL-F36AM flash.
– A diffuser is used for flash shooting.

Selecting the flash control mode to set the amount of flash
light (Flash control)

ADI flash

This method controls the lighting of the flash, factoring in the
focus distance information and light metering data from the
pre-flash. This method enables an accurate flash
compensation with virtually no effect from the reflection off
the subject.

Pre-flash TTL

This method controls the amount of flash light depending on
the data only from pre-flash light metering. This method is
susceptible to the reflection off the subject.

Advertising
This manual is related to the following products: