Sony Ericsson NAS-E35HD - Manual (Page 21)

1 GB
NAS-E35HD.GB.3-292-247-11(1)
The time on the clock must be correctly set for the
proper operation of functions. Do the procedure
below to set the clock.
1
Press  (power) to turn on the
unit.
2
Press CLOCK/TIMER SET.
If the current mode appears on the display,
press / repeatedly to select “CLOCK
SET?”, and then press ENTER.
3
Press / repeatedly to set the
hour, and then press ENTER.
4
Do the same procedure to set the
minutes.
The clock settings are lost when you
disconnect the power cord or if a power
failure occurs.
To display the clock when the unit is
turned off
Press DISPLAY. The clock is displayed for about 8
seconds.
Setting the clock