Sanyo HT32744 - Manual (Page 7)

7
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
HDTV BACK— JACKS LOCATIONS AND FUNCTIONS
Audio Cables—Provides analog left /
right audio for your external equipment
connections.
Component:Y, Pb, Pr—Use these cables to
connect your component equipment. This
connection provides the best picture, but
does not include sound. (Cable colors:
Y = green, Pb = blue, and Pr = red.)
Composite Audio/Video (RCA type)—
Use these cables for standard analog
audio/video connections. Normally cables
are color coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.
Coaxial Cable—Used to connect a signal to
your digital or Analog RF Antenna In terminal.
Optical Digital Audio—Use this cable to
connect the DTV‘s digital audio output to a
multi-channel audio receiver.
S-Video Cable—This cable provide separate
luminance and color signals for higher reso-
lution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
NOTE: None of these cables are supplied with this DTV.
GLOSSARY OF CABLES
➀
Component Video Input (COMPO 2)—Connect
digital video equipment to the Y, Pb, Pr and VIDEO 2
Audio L/R jacks. These jacks will automatically detect
the type of signal being received (HDTV, EDTV, or
SDTV).
➁
S-Video (Video 1 and 2) Input—To enhance video
detail use the S-Video jacks instead of the Video jacks,
if available on your external equipment. (S-Video con-
nections will override connections to the Video input
jacks.)
➂
Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced
stereo home theater system equipped with Dolby
®
Digital 5.1.
➃
HDMI (High Definition Multimedia Interface)
Input—Connect digital video equipment to this jack. It
only takes one high bandwidth cable (not supplied) to
communicate between the video/audio equipment and
this TV. This connection is compatible with DVI
equipped devices. (Separate audio connection is
required for DVI device.)
➄
Analog Audio Out (L/R) Jacks—Connect external
audio equipment here. (See page 11.)
➅
Component Video Input (COMPO 3)—Connect
digital video equipment to the Y, Pb, Pr and AUDIO 3
(L/R) jacks. (See page 10.) These jacks will automati-
cally detect the type of signal being received (HDTV,
EDTV, or SDTV).
➆
Audio/Video Input (Video 1/Video 2)—Connect
standard video equipment here. (See page 11.)
NOTE: S-Video1/2 connections override the Video1/2
video composite connections.
➇
Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna or cable system to this jack as shown
on page 5.
➈
Digital Antenna Input—Connect an RF antenna to
this jack as shown on page 5.
➉
Service Terminal—For technical use only.
➄ ➅ ➆ ➇ ➈ ➉
➀ ➁ ➂
➃