Samsung DVD-2020 - Manual (Page 5)

SETUP
Description-Front Panel
8 9
Description-Rear Panel
Front Panel Controls
1. STANDBY/ON
• Use to turn your player on and off (standby).
2. DISC TRAY
• Load the disc here.
3. DISPLAY
• Operation indicators are displayed here.
4. OPEN/CLOSE
• Press to open and close the disc tray.
5. PLAY/PAUSE ( )
• Begin or pause disc play.
6. STOP ( )
• Stops disc play.
7. SKIP ( / )
• Use to skip a scene or music.
8. EZ VIEW
• Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
1 6 2 3 4 5 7 8
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
1
2 3
Front Panel Display
OPTICAL ANALOG AUDIO OUT VIDEO OUT S-VIDEO OUT
COAXIAL
COMPONENT VIDEO OUT
COMPONENT
VIDEO OUT
SELECT
S-VIDEO OPTICAL ANALOG AUDIO OUT VIDEO OUT S-VIDEO OUT
COAXIAL
COMPONENT VIDEO OUT
COMPONENT
VIDEO OUT
SELECT
S-VIDEO
R2
R1
L2
L1
V2
V1
1 2 3 4 5 6 7 1 2 3 4 5 6 7
1. DIGITAL AUDIO OUT JACK
• Use either an optical digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher
quality picture. The S-Video must be selected in the VIDEO OUT SELECT.
5. DIGITAL AUDIO OUT JACK
• Use either an coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and
Y video. Along with S-Video, Component Video provides the best picture quality.
The COMPONENT must be selected in the VIDEO OUT SELECT.
7. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is
selected, COMPONENT may not work.
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
NOTE
Rear Panel
DVD-E218/DVD-2020 DVD-E318