Listening to the radio, Ra dio, Manual or auto tuning 1 – Sharp SD-EX200 User Manual
Page 20
20
SD-EX200
03/3/14
SD-EX200_sec.fm
TINSZ0523AWZZ
Ra
dio
- Lis
te
n
ing t
o
the
r
a
dio -
Listening to the radio
Manual or Auto tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band.
3
Press the TUNING ( or ) button to tune in to the desired station.
You can tune in to the desired station by pressing the
or
button on the
remote control.
Manual tuning:
Press the TUNING button as many times as required to tune in to the desired sta-
tion.
Auto tuning:
When the TUNING button is pressed for 0.5 seconds or more, scanning will start
automatically and the tuner will stop at the first receivable broadcast station.
Notes:
z
When radio interference occurs, auto scan tuning may stop automatically at
that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING button again.
FM stereo
FM monaural
AM