Connecting other equipment, Connecting other equipment 16, Av connection to the aerial socket – Sanyo CA21CF1M User Manual
Page 16: Presetting to watch the video input
To
Audio Input-R (A
V2)
To
Audio Input-L
(A
V2)
To
V
ideo Input (A
V2)
Video/DVD Player
■
■
To watch the Front AV2 video
input picture, select AV2
position by pressing the TV/AV
Selector.
Connecting Other Equipment
Connecting Other Equipment
16
Aerial Socket
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and
Manual Tuning on pages 11.)
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
VCR for
playback
PLAYBACK
■
■ To record TV programme, select TV mode by
pressing the TV/AV Selector and record the
desired programme.
15
The picture signal being displayed on the TV screen is
output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dub-
bing from AV1 or AV2 input terminals.
TV mode
Connecting to the Front AV2 Input Jacks
Connecting to the Monitor Output Jacks
Y
MONITOR OUT
AV1/DVD
C
R
C
B
R
L
(MONO)
VIDEO
R
L
INPUT
V
D
E
O
I
To Audio Output-R
To Audio Output-L
To Video Output
VCR for Recording
To video and
audio inputs
AV Connection To the Aerial Socket
It is convenient to use the AV input jack on the front panel for equipment
that is often connected and disconnected.
AV2
Note: For monaural model TV there is no L/R audio input terminals. If the
video player is stereo, connect the Left (L) audio output terminal from
video player to audio input terminal on the monaural TV set (more details
see your video player manual book).
■ To dub video from the AV1 terminal input, select
AV1 position and by pressing the TV/AV Selector.
AV1
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 16