Samsung 26-444 - Manual (Page 2)

2
USING THE JOYSTICK
Cautions:
• Always turn off your computer before connecting or disconnecting the joystick from the
game port.
• When disconnecting the joystick from the computer, hold and gently pull on the connector
plug. Do not pull the cable.
1. Turn off the computer, insert the joystick’s connector into game port
A or B on your computer, then turn on the computer.
Note: If you have two joystick ports, you can use either one. How-
ever, most software uses game port A for the primary joystick.
2. If you are using Windows

95 or 98, configure and calibrate the joy-
stick (see “Configuring/Calibrating the Joystick in Windows 95/98”),
then load the game software according to the game's owner's man-
ual.
3. Center the joystick if you are using it for the first time or after you
use it for a while (see “Centering the Joystick” on Page 3).
4. Set C/D/TA/TB to C/D (for normal fire when you press a button) or
to TURBO (for high-speed turbo fire when you hold down a but-
ton). If you set C/D/TA/TB to C/D , the function of the buttons is de-
termined by your game program. If you set C/D/TA/TB to TA/TB ,
button C becomes turbo button A, and button D becomes turbo
button B .
5. Press the joystick onto the desk or table to secure it.
Configuring/Calibrating the Joystick in Windows 95/98
1. From the Start Menu, select Settings, click on Control Panel, then double-click the joystick
icon.
2. Click on Add, select 3-Axis 4-Button Control System, then click on OK.
C/D
D
(Turbo B)
B
A
TA/TB
C
(Turbo A)
26-444.fm Page 2 Wednesday, July 28, 1999 2:14 PM